25mm Perforated White Color Aluminum Honeycomb Ceiling Panels
This composite panel is made from two aluminium alloy sheets as
skins and aluminum honeycomb as the core. The honeycomb structure
gives the panel better flatness and strength than traditional
aluminium ceiling tiles, meanwhile, the honeycomb ceiling panel can
be made in larger size and manufactured into curved or angled
The perforation on top aluminum skin of the panels to give good
sound insulation performance. And the non-woven fabric bewteen the
perforated aluminum skin and the honeycomb core will prevent the
glues come out from inside, so the perforated aluminum surface is
clean with decorative beauty.
The top aluminum skin is first coated with different colors, then
be perforated before composition.
Perforation:Diameter 2.5mm,3.0mm etc
|Aluminum alloy||Aluminum alloy 5052/3003|
|Honeycomb panel thickness||3.5-300mm|
|Dimension||Width: up to 2000mm|
Length: up to 16000mm
|Aluminum face sheet||Thickness: 0.5-1.2mm|
|Aluminum base sheet||Thickness: 0.5-1.2mm|
|Honeycomb core||Aluminum alloy 3003 H24|
Cell size: 1/2inch, 1/4inch, 3/8inch
Foil thickness: 0.04mm, 0.05mm, 0.06mm, 0.07mm
|Adhesive||Polymer adhesive film|
Bio-component modified epoxy resin.
Bio-component modified polyurethane
|Coating||Fluorocarbon roller coating|
|Color||Pure white, Metallic color, RAL & Pantone Color|
|Special color||Wooden grain and stone grain|
• Low weight and competitive cost
• High stiffness and strength
• Easy to fabricate and install
• PVDF coating or anodized finish aluminum facing skins for good
anti-corrosion performance and high resistance.
• Aluminium facing skins are available in a range of thicknesses
from 0.5mm to 3.0mm as per design requirements
• Panels can be produced with different aluminum sheet thicknesses
on front and back faces and panel thicknesses as per custom design
requirements for weight, strength and installation.
• Aluminum faced panels are chemically cleaned: suitable for
painting or the application of decorative laminates
• Brushed and anodised aluminum finishes are also available
• Aluminum honeycomb cell size is 4mm to 8mm as request.
• Wide selection of Joiners &Assembly Accessories are
Roller coating or anodized surface, unrolling and cutting aluminium
sheets, punching corners, bending aluminum sheets, supplying
adhesive (glue) to front and back panels, unfolding aluminum
honeycomb core, cutting out and putting honeycomb core into back
panel, putting front panel, fixing front and back panels, putting
sandwich panels into laminating machine, laminating, checking and
finishing. To make panels ready for installation (for architecture
cladding and decoration), asembling accessories to the panels and
then packing for shipping.
Packing and Container Loading
There will be protective film on each panel.